Sunpak PZ42X salama
Salama on helppo ja nopea kiinnittää ja on yhteensopiva
etäisyyden huomioivan E-TTL II -järjestelmän kanssa.
Salaman välähdyspää kääntyy kolmeen suuntaan.
Yhteensopiva useimpien uusimpienkin järjestelmä-
kameroiden kanssa.
Ohjeluku (ISO 100·m) 42
Virtalähde: 4-AA/Alkaline tai Ni-MH
Välähdysmäärä:
Virtalähde Alkaline-paristo 4-AA 220
Virtalähde Ni-MH 4-AA 240
Tehoalue: TTL Auto 1.5-21m
Välähdysteho: FULL,1/2,1/4,1/8,1/16,1/32,1/64
Valaisukulma: 16mm (APS-C), 24mm (kinokoko)
Tarkennuksen apuvalo: 1-5m
Välähdysnopeus: n.1/500-1/13,000 sec.
Kääntyvä salamapää: Ylös 90°, vasen 180°, oikea 120°
Laajakulmahajoitin: Sisäänrakennettu 13mm (APS-C), 20mm (kinokoko)
Mitat (KxLxS): 116x64x102mm
Paino: 260g
Yhteensopivuus: Sony: ADI, P-TTL
PZ42X runs on 4-AA batteries in a compact
and light body.
The recycle time is about 3.5 seconds.
The photographer can seize
opportunities to shoot precious moments,
for example, at wedding ceremonies, parties and
athletic meetings.
To realize the maximum Guide Number 42(ISO100-m)
This covers well the illumination area with
a focal length of 100 mm (* when converted to
35-mm film size), which is considered to
be most suitable for portrait shooting. (Up to 21 m.)
Compatible with TTL functions of digital
SLR cameras.
The light emission part can be moved 90°
upward, 180° to the left and 120°
to the right, flexibly responding to
every possible bounce shooting situation.
EV adjustment function
The photographer's intention can be freely
represented by the EV adjustment function up to +/-1.5EV.
* 7 steps (-1.5, -1, -0.5, 0, +0.5, +1, +1.5) can be set.
* Photo shows all-lit image. (Not actual image)
Power Ratio is available.
Auto Focus Assist Light supports focusing
in low light situations. When shooting in the
dark or dim places, the near infrared assist
light is automatically illuminated to enable automatic focusing.
*Activated only when focusing on central position.
Switching function of focal length display
The focal length display can be switched
between the digital display (APS-C) and
the 35-mm film size converted display.
The photographer can check the focal length
display at any time during shooting.
TTL signals are automatically recognized
just by mounting and turning on.
The latest high-accuracy TTL signals are
recognized by just mounting this flash
on a camera and turning it on. This flash
ensures the accurate, optimum, and high-quality
lighting.
Built-in wide panel
Applicable to super-wide-angle lens, more than 20mm focal length.
(when converted to 35-mm film size)
|
Suomeksi
